Posted in

What causes a Rexroth hydraulic motor to stall?

If you’re a professional working in industrial machinery, material handling, or mobile equipment, you know Rexroth hydraulic motors are built to deliver consistent, high-torque performance for thousands of operating hours. But even the most robust components can stall—and when that happens, it’s not just a minor inconvenience. A stalled motor can halt an entire production line, delay a construction project, or lead to costly downtime for off-road equipment. As a Rexroth hydraulic motor supplier with over 12 years of hands-on experience troubleshooting these issues for clients across agriculture, mining, and manufacturing, I’ve seen stalls stem from far more than just a “broken part.” Today, I’m breaking down the science behind why a Rexroth hydraulic motor stalls, how to spot the warning signs, and what you can do to prevent it—because avoiding a stall is always cheaper and faster than fixing one mid-operation. Rexroth Hydraulic Motor

First, let’s start with the basics: what does a hydraulic motor stall actually mean? Unlike an electric motor, which stalls when it can’t turn against mechanical load, a hydraulic motor’s stall point is the moment the output shaft stops rotating entirely, even when pressurized hydraulic fluid is still flowing into it. For Rexroth’s line of bent-axis, in-line, and gear motors, this is a critical operating limit—exceeding it can cause permanent internal damage, like cracked pistons or worn valve plates. That’s why understanding the root causes isn’t just about diagnostics; it’s about protecting your investment in a component designed to last.

One of the most common and preventable causes of a Rexroth hydraulic motor stall is incorrect system pressure or flow. Rexroth hydraulic motors are engineered with specific pressure and flow ratings tailored to their model and application. For example, a Rexroth A6VM series variable bent-axis motor, commonly used in excavator travel drives, is rated for a maximum continuous pressure of 400 bar (5800 psi). If your system’s pressure exceeds this limit, two things can happen: first, the motor’s internal relief valves—which are designed to protect against overpressure—will trigger, reducing flow to the motor and causing it to slow to a stop. Second, sustained overpressure can warp the motor’s swash plate or bend piston rods, creating so much internal friction that the shaft can’t overcome the resistance to turn. I’ve seen this firsthand with a farm client last year: their combine harvester’s Rexroth hydraulic motor for the auger kept stalling mid-harvest, and we traced it to a faulty pressure gauge on their system, which read 450 bar unknowingly. Replacing the gauge and adjusting the system relief valve to match the motor’s rating fixed the issue immediately.

Flow is just as important as pressure here. Rexroth motors rely on a specific volume of fluid to generate torque and keep the shaft rotating. If your hydraulic pump is delivering less flow than the motor requires—say, a pump rated for 100 L/min powering a motor that needs 120 L/min—the motor will struggle to build enough torque, especially under load, and stall. The reverse can also be a problem: too much flow, too fast. A sudden spike in flow can overwhelm the motor’s internal components, causing the shaft to seize. For example, a mobile crane client of mine had a stalling issue with their Rexroth winch motor that turned out to be a misadjusted flow control valve. The valve was sending 30% more flow than the motor’s maximum design, leading to rapid overheating and internal wear that eventually caused a stall. The fix? Re-calibrating the flow control to match the motor’s rated flow, and adding a flow regulator to prevent future spikes.

Another leading cause of stalling is contaminated hydraulic fluid. Let’s be clear: even a tiny amount of contamination—like metal shavings, dust, or water—can wreak havoc on a Rexroth hydraulic motor’s precision-machined internal parts. Rexroth’s motors rely on tight tolerances (often less than 1 micron between components) to operate efficiently. When debris gets trapped between the piston and cylinder bore, or between the valve plate and motor block, it creates additional friction that the motor can’t overcome, leading to a stall. Water contamination is even worse: it causes corrosion on metal parts, leading to pitting and wear that can seize the motor’s components over time. I had a mining client last quarter whose Rexroth conveyor drive motor stalled on the job site, and a fluid analysis found 2% water content in their hydraulic oil—enough to cause rust on the motor’s pistons and lock the shaft. The solution here was a full fluid flush, replacing the failed motor, and adding a water separator to their system’s return line. This isn’t an isolated case: Rexroth’s own technical documentation notes that 70% of hydraulic system failures (including stalls) are caused by contaminated fluid, so this is an issue that’s easily avoided with regular fluid testing and filtration.

Mechanical load issues are another frequent culprit, and they’re often misdiagnosed as a motor problem rather than a system issue. Rexroth motors are designed to handle specific peak torque loads, but if the driven component—like a conveyor belt, crane winch, or mixer—has become misaligned, overloaded, or jammed, that extra resistance can push the motor beyond its torque capacity, causing a stall. For example, a construction client of mine had a Rexroth hydraulic motor powering their skid steer’s hydraulic attachment that kept stalling when lifting pallets. We initially suspected the motor, but a quick check of the attachment found that the arm’s pivot pin had rusted solid, adding 200 lbs of extra load to the motor. Removing and lubricating the pin eliminated the extra resistance, and the motor ran without stalling after that. Another common mechanical load issue is worn or damaged driven components: if a gear or sprocket connected to the motor shaft is stripped or misaligned, it creates uneven torque that can trigger a stall even when the motor itself is in good condition.

Temperature extremes also play a role, especially in mobile equipment or industrial systems that operate outdoors in harsh conditions. Hydraulic fluid’s viscosity changes with temperature: when it’s too cold, fluid becomes thick and slow to flow, so the motor can’t get enough fluid to build torque, leading to a stall. When it’s too hot, fluid becomes thin, which reduces lubrication, causing internal components to wear and seize. Rexroth’s technical specs recommend that their motors operate in a fluid temperature range of -20°C to 80°C (-4°F to 176°F). I’ve seen this with a snowplow client in Canada last winter: their Rexroth travel motor kept stalling early in the morning, when temperatures were -25°C. The thin hydraulic oil they were using was too thick to flow properly in cold temps, so we recommended switching to a low-viscosity winter-grade hydraulic fluid, which solved the cold-weather stalling issue. Conversely, a food processing client in Texas had a stalling problem in their mixing motor during summer, when their plant’s temperature hit 95°F. The high temperature thinned the oil too much, leading to increased wear on the motor’s bearings. Adding a heat exchanger to their hydraulic system kept the fluid temperature within the recommended range, and the stalling stopped.

Electrical and control system issues are often overlooked, but they’re another key cause of stalling. Rexroth hydraulic motors are usually paired with hydraulic pumps, valves, and electronic controllers that regulate pressure, flow, and direction. If a control valve malfunctions—say, a solenoid valve that sticks open or closed—it can divert flow away from the motor, leaving it without enough fluid to run, or create pressure spikes that damage the motor. Faulty sensors, like pressure or temperature sensors, can also send incorrect signals to the controller, leading to overpressure or underflow conditions that trigger a stall. Last year, I worked with a packaging plant whose Rexroth linear actuator hydraulic motor kept stalling, and the issue was traced to a faulty position sensor that told the controller the load was farther along than it actually was, leading the system to apply too much pressure and stall the motor. Replacing the sensor and calibrating the controller fixed the problem in a matter of hours.

Now, if your Rexroth hydraulic motor has already stalled, how do you diagnose and fix it? First, start with a visual check: inspect the motor’s external components for leaks, damage, or loose connections. Next, test the hydraulic system’s pressure and flow with a calibrated gauge and flow meter to make sure they match the motor’s ratings. Then, test the fluid quality: take a sample and send it for analysis to check for contamination, water content, and viscosity. If the fluid is good, check the driven component (the machine the motor is powering) for jams, misalignment, or extra load. If all of those check out, you may have an internal motor issue—like worn pistons, a damaged valve plate, or a faulty swash plate. For Rexroth motors, internal repairs should only be done by certified technicians, because the tight tolerances and precision machining require specialized tools and knowledge.

Preventing a stall is always better than reacting to one, and as a Rexroth hydraulic motor supplier, I can tell you that the most effective prevention strategies are simple and consistent. First, follow Rexroth’s regular maintenance schedule: that includes changing the hydraulic fluid and filter every 2000 operating hours, checking pressure and flow quarterly, and testing fluid quality semi-annually. Second, make sure all components in your hydraulic system (pumps, valves, hoses) are matched to your Rexroth motor’s specifications—using a mismatched pump or valve is one of the most common causes of stalling. Third, keep your system clean: use high-quality filters, add water separators for outdoor equipment, and avoid letting debris enter the hydraulic reservoir. Fourth, monitor operating conditions: watch for temperature extremes, misaligned driven components, and warning signs like slow response, unusual noise, or leaks, which often precede a stall.

I’ve worked with hundreds of clients over the years, and the ones who have the least stalling issues are the ones who invest in proactive maintenance rather than emergency repairs. A few months ago, a client of mine was facing a $50,000 potential downtime cost from a stalled Rexroth motor on their mining conveyor. Instead of waiting for the motor to fail, we recommended a preventative maintenance check: we flushed their old fluid, replaced the filter, adjusted the system pressure to match their Rexroth A6VM motor’s rating, and lubricated the driven components. That check cost them $1,500, but it saved them from the $50k downtime, plus the cost of a new motor. It’s a small investment that pays off big.

If you’re dealing with a stalled Rexroth hydraulic motor, or you want to make sure your system is set up to avoid stalling, I’m here to help. We don’t just supply Rexroth motors—we provide technical support, diagnostic services, and replacement parts tailored to your specific application. Whether you’re a small farm with a single combine or a large construction company with a fleet of heavy equipment, we can work with you to identify the root cause of any stalling issue and implement a plan to prevent it from happening again. Don’t let a stalled motor derail your operations—reach out to us to discuss your needs, and let’s get your equipment running smoothly again.

Hydraulic Valve References:
Rexroth Hydraulic Motor Technical Manual, Bosch Rexroth AG, 2022
ISO 4406:2017, Hydraulic Fluid Power—Fluid Contamination—Classification, International Organization for Standardization
Hydraulic System Failure Analysis: Common Causes and Prevention, Fluid Power Distribution Association, 2023


Jining Jinjia Hydraulic Co., Ltd.
Jining Jinjia Hydraulic Co., Ltd. is one of the most professional rexroth hydraulic motor manufacturers and suppliers in China, specialized in providing high quality orbit hydraulic motors. We warmly welcome you to buy customized rexroth hydraulic motor at competitive price from our factory.
Address: Jining New Material Industrial Park, Shandong, China.
E-mail: Sales@jinjiahyd.com
WebSite: https://www.jinjiahyd.com/