{"id":3534,"date":"2026-10-15T13:44:30","date_gmt":"2026-10-15T05:44:30","guid":{"rendered":"http:\/\/www.spagirardot.com\/blog\/?p=3534"},"modified":"2026-10-15T13:44:30","modified_gmt":"2026-10-15T05:44:30","slug":"what-are-flat-washers-used-for-4860-e89b3e","status":"publish","type":"post","link":"http:\/\/www.spagirardot.com\/blog\/2026\/10\/15\/what-are-flat-washers-used-for-4860-e89b3e\/","title":{"rendered":"What are flat washers used for?"},"content":{"rendered":"

If you\u2019ve ever grabbed a screwdriver and a set of bolts to hang a shelf, tighten a bike pedal, or even fix a loose hinge on your fridge, you\u2019ve definitely used a flat washer. Chances are, you didn\u2019t even notice it half the time\u2014it\u2019s that thin, plain metal ring that sits between a nut, bolt head, and the surface you\u2019re securing. I\u2019ve been a flat washer supplier for over 12 years, and I can\u2019t tell you how many times people reach out to me saying, \u201cWait, those little things actually matter?\u201d Yeah, they do\u2014way more than most DIYers and even some small contractors realize. Flat Washers<\/a><\/p>\n

<\/p>\n

Let\u2019s start with the basics, because that\u2019s where most confusion lives. A lot of folks mix them up with other washers, like lock washers. Flat washers are just the plain, rigid ones\u2014usually made of steel, stainless steel, brass, or sometimes even nylon for soft surfaces or electrical work. They come in every size imaginable, from tiny ones for a cellphone circuit board to monster ones for heavy construction equipment. When I first started selling these, I thought it was straightforward too: \u201cthey fill gaps.\u201d That\u2019s part of it, but like, 20% of what they actually do. The rest is keeping your stuff from breaking, rusting, or falling apart when you need it most.<\/p>\n

First big use: distributing load so you don\u2019t damage the surface you\u2019re working on. Let\u2019s say you\u2019re hanging a wooden shelf on drywall. If you just run a bolt straight into the drywall, the pressure from the bolt head will concentrate on that tiny spot in the drywall. You tighten it a little too much, and boom\u2014you\u2019ve got a cracked shelf or a hole that\u2019s way too big. Stick a flat washer under the bolt head, though, and suddenly that same pressure is spread out over a much larger area. It\u2019s like pushing a thumbtack vs. pushing your whole palm against a wall\u2014same amount of force, way less concentrated. I had a customer last year who installs custom kitchen cabinets for high-end apartments. He told me he used to skip washers and deal with so many callbacks where shelves pulled away from walls. Once he started using our 18-8 stainless steel flat washers, that problem basically vanished. Makes sense, right? Wood, drywall, even metal siding\u2014all softer than a bolt or nut, so they need that extra space to spread the load.<\/p>\n

Speaking of that pressure thing: another big one is preventing bolts from pulling through material. That\u2019s super common with thin materials, like metal sheet for a fence, or even plastic parts for lawn equipment. If you\u2019re using a bolt to clamp two pieces of thin metal together, the edges of the holes will start to bend or tear when you tighten the nut. Again, the flat washer acts as a buffer. It covers the hole, so the metal can\u2019t bend right at the opening. I once had a guy from a trailer manufacturing shop call me in a panic because their line was down\u2014their old supplier was sending washers that were too thin, and their trailer frames were cracking at the bolt holes. We rushed him a batch of our heavy-duty carbon steel flat washers, and he got back up and running in a day. That\u2019s the kind of small part that stops whole operations cold, honestly.<\/p>\n

Now, let\u2019s talk about something a lot of people don\u2019t think about: rust and corrosion. Wait, why would a flat washer stop that? Well, a lot of the time, when you put a bolt directly against a surface, moisture can get trapped in the gap between the two metals. That\u2019s a recipe for corrosion\u2014galvanic corrosion, to be exact. If you\u2019ve got two different metals touching, like a steel bolt and an aluminum gutter, they\u2019ll react when moisture gets in there, and you\u2019ll end up with rust or pitting that eats away at both parts. A flat washer acts as a barrier, right? If you use a stainless steel washer with that same steel bolt and aluminum gutter, it keeps those two metals from touching directly. Even if you\u2019re working with the same metal\u2014like two steel parts\u2014trapped moisture will still cause rust over time. The washer seals that gap a little, so less moisture gets in. I deal with this all the time for outdoor projects: patio furniture, deck railings, farm equipment. Most of them prefer our hot-dip galvanized flat washers because they\u2019re coated to resist rust, and they create that barrier between the bolt and the wood or metal.<\/p>\n

Wait, there\u2019s also electrical stuff. A lot of people use nylon flat washers for electrical applications, right? Because metal washers can conduct electricity, which might cause a short if two conductive parts are touching where they shouldn\u2019t. Nylon is an insulator, so it stops that. I had an electrician customer a while back who was working on a commercial lighting installation. He told me he was using metal washers and kept blowing a few circuits a day. Switched to our precision-cut nylon flat washers, and that issue went away immediately. The washers are just the right size, too\u2014can\u2019t use a washer that\u2019s too small or it won\u2019t cover the whole contact point, and too big and it might not fit properly. That\u2019s why our team tests every batch to make sure the dimensions are exact; if a washer is off by even a fraction of a millimeter, it\u2019s useless for electrical work.<\/p>\n

Oh, and let\u2019s not forget about when you\u2019re dealing with uneven surfaces. Like, if you\u2019re securing a pipe to a wall, and the wall has a little bit of texture, or the pipe fitting isn\u2019t perfectly flat. If you just tighten the bolt, it might sit crookedly, and over time, that will work itself loose. The flat washer bends a tiny bit (wait, no\u2014wait, actually, flat washers are rigid, but they help distribute the force even on uneven spots) \u2014 yeah, right, it sits on the high points of the uneven surface, so when you tighten the nut, the pressure is spread evenly, not just on the parts that touch. That keeps the bolt from wobbling, which prevents it from coming loose over time. I\u2019ve seen so many fence posts that wiggled because the bolts were sitting on uneven concrete, until they added a washer under the nut. Suddenly, no more wiggle.<\/p>\n

Now, let\u2019s get real for a second\u2014flat washers aren\u2019t just for big construction or fancy cabinetry. I sell them to hobbyists, too\u2014guys who build custom wooden boats, people who fix old bikes, even crafters who make metal jewelry. A guy who restores vintage motorcycles contacted me last month saying he needed tiny, precise flat washers for the engine bolts. He\u2019d bought cheap ones online that were either too thick or had burrs that would scratch the engine\u2019s aluminum block. Our precision-ground stainless steel ones? Perfect, he said, and they look like they belong on a 1970s cafe racer, not like some cheap afterthought.<\/p>\n

But here\u2019s the thing I always tell people: not all flat washers are the same. That\u2019s a huge mistake a lot of buyers make\u2014they just grab whatever flat washer is cheapest, or whatever comes in the box with bolts at the hardware store. But if you\u2019re working with stainless steel, you need a stainless steel washer, not a cheap carbon steel one that will rust and stain your work. If you\u2019re working with soft wood, you need a thicker washer to spread the load more. If you\u2019re outside, you need a galvanized or stainless steel one that can handle moisture and temperature changes. A lot of my repeat customers tell me that once they switched from the cheap, random washers at the big box store to our consistent, tested flat washers, their projects lasted way longer and they had way fewer callbacks.<\/p>\n

I also get a lot of questions about when you actually need to use a flat washer vs. a lock washer. Like, do you ever need both? The short answer is: it depends, but most of the time, a flat washer is your base, and lock washers are for when you have vibration that might loosen the nut. For example, if you\u2019re securing a lawn mower blade, which vibrates a ton, you might use a flat washer to protect the blade and deck, plus a lock washer to keep the nut from coming loose. But if you\u2019re just hanging a shelf, a flat washer is all you need\u2014no lock washer required. I always make sure to explain that to new customers, because mixing up washers can lead to problems.<\/p>\n

Wait, another use I recently discovered? When you\u2019re aligning parts. Like, if you have two metal plates that need to line up perfectly, a flat washer can act as a shim? No, wait, shims are different, but if one plate is slightly offset, a washer of the right thickness can adjust the gap so the bolt doesn\u2019t have to bend to fit. That\u2019s a trick a lot of metal fabricators use. I had a customer who builds custom metal tables, and he uses our 1mm thick flat washers to adjust the height of the legs so the table doesn\u2019t wobble on uneven floors. Brilliant, right? It\u2019s a small thing, but it saves him from having to make custom shims every time he does a job.<\/p>\n

Let me circle back to why this stuff matters, because I think a lot of people overlook it. When you\u2019re building something\u2014whether it\u2019s a bookshelf, a truck, a house, or a phone\u2014you want it to last. You don\u2019t want to go back and fix it a year later because a bolt pulled through a wall, or rusted apart, or came loose because the pressure was uneven. Flat washers are the unsung heroes of that. They\u2019re not flashy, they don\u2019t get any Instagram love, but if you skip them or use the wrong ones, your project will have issues.<\/p>\n

As a flat washer supplier, I don\u2019t just sell you a ring. I make sure you get the right size, the right material, the right thickness for exactly what you\u2019re working on. I\u2019ve spent years testing different materials and manufacturing processes to make sure every washer I send is consistent\u2014no burrs, no uneven thickness, no cheap coating that will peel after a month outside. I\u2019ve had customers who came to me after buying from three other suppliers, saying my washers are the only ones that never give them trouble. That\u2019s what matters to me.<\/p>\n

<\/p>\n

If you\u2019re working on a project right now\u2014whether it\u2019s a small DIY job at home, a big commercial build, or something in between\u2014don\u2019t sleep on the flat washers. Pick the right ones for the material, the environment, and the load. If you\u2019re not sure which size or type you need, hit me up to chat through it. I don\u2019t do pushy sales stuff, I just know this stuff inside and out, and I want to help you get the right part to make your project work. Your shelf won\u2019t sag, your fence won\u2019t widen, your bike won\u2019t rattle apart. That\u2019s the whole point, right? Small parts, big impact.<\/p>\n

Structural Nuts<\/a> References:<\/p>\n

    \n
  1. Machinery\u2019s Handbook, 31st Edition, Industrial Press Inc., 2020.<\/li>\n
  2. Fastener Fundamentals: A Practical Guide, American Society of Mechanical Engineers (ASME), 2018.<\/li>\n
  3. Corrosion Prevention for Metals, NACE International, 2019.<\/li>\n<\/ol>\n
    \n

    Handan Jihao Fastener Co., Ltd.<\/a>
    We’re known as one of the most professional flat washers manufacturers and suppliers in China. With abundant experience, we warmly welcome you to wholesale customized flat washers made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
    Address: A2, Row 31, Feiyu Screw World, Hebei Pu, Linmengguan Town, Yongnian District, Handan City, Hebei Province
    E-mail: wenzhaona0@gmail.com
    WebSite:     https:\/\/www.chinaboltnut.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever grabbed a screwdriver and a set of bolts to hang a shelf, tighten … What are flat washers used for?<\/span>Read more<\/a><\/p>\n","protected":false},"author":22,"featured_media":3534,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3497],"class_list":["post-3534","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-flat-washers-4935-e8c93a"],"_links":{"self":[{"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/posts\/3534","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/users\/22"}],"replies":[{"embeddable":true,"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/comments?post=3534"}],"version-history":[{"count":0,"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/posts\/3534\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/posts\/3534"}],"wp:attachment":[{"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/media?parent=3534"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/categories?post=3534"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.spagirardot.com\/blog\/wp-json\/wp\/v2\/tags?post=3534"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}